Ruger American Gen 2 Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for Ruger American Gen 2 short action rifles. (7.62, .308, 6.5 Creed, 5.56, .243, 300 blackout, 6mm ARC)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was in need of a wall mount that allowed me to mount the rifle horizonal or vertical. In order to do this I needed to use the AICS mag well to fix the rifle to the mount. I could not find one, so I made one. This is a great design that fits in the mag well perfectly. Allowing the mag release to lock and hold the rifle in place.
Printed in PLA
15% infill
Supports only for holes (if needed)
Square on the mag release side up. Lay the face of the print down that is opposite from the mag release square.