AYN THOR Case (Top and Bottom)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is set up to allow both the top and bottom shells to be used at the same time, preventing the hinge stress.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 202
- Wydruki
- 0
- Wyświetlenia
- 1489
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Thor Case (Top and Bottom)
This case allows both the top and bottom to be used at the same time without putting strain on the hinge and preventing the system from registering the lid as closed. This was an issue I was facing with other designs.
The lid was created to allow better comfort will using since other designs rubbed against your finger and prevented a more natural/comfortable hand position.
This was designed to be used with PETG or PLA for a harder case. If you aren't going to apply a felt interior you can reduce the scale of the bottom shell to 99.5% on the original size to have a tighter fit.
NOTE: Image model was printed on Flashforge A5m with .04 nozzle with draft preset and tree supports on the bottom back edge. Filament is Flashforge Slik PLA.