Small parts tray (7x7) with slots for interchangeable labels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tray for quickly accessing small parts (i.e. SMD/SMT components) with places for paper labels.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A shallow tray for quick access to small parts that might be hard to differentiate (i.e. SMD/SMT components for soldering). 49 compartments (7x7) with places for paper labels (~20x8mm) for easy changing between jobs.
Relief grooves added at the bottom to prevent warping due to large size. Due to these grooves I recommend setting "External bridge infill direction" in Orca to 45 degrees. With default of 0 degrees bridges run across half of grooves (good), but along the other half (not so good). Setting it to 45 makes bridging run at 45 degree angle for all the grooves. They are very short so added bridge length does not matter.
Let me know if you need different sizes/arrangements.