Pizza box v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Version 2 now with a printable inlay
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pizza box v2
Updated the pizza box
The original files are included.
You will need to enable supports everywhere.
Whats new, added a new top with no bevel and added an inlay.
The circles should just pop in but the criss-cross will need a little Finessing. I used two hammers, one as an anvil, and a putty knife.
Used the putty knife as a flat surface so it would not mar the surface of the inlay.
A little glue on the circles, keeps them from being dislodged.
I would recommend printing out at least two of the inlays just in-case, If you have a build plate with a ruff surface it will give it a nice faceted look.
Careful snapping on the lid, make sure the path is clear and when closing it the first time use minimal force.
Step files for original files included