Owl-Reach (Crutch‑mounted grabber clip)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Crutch-mounted grabber clip. Pick up objects hands-free while traveling. Flexible TPU clip holds various grabber sizes.
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 82
- Wydruki
- 1
- Wyświetlenia
- 659
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
See photos for installation instructions.
Owl-Reach is a crutch-mounted accessory designed to solve a practical challenge: managing a grabber tool while using crutches. It allows you to carry a grabber clip hands-free, so you can reach objects on the ground without having to set your crutches aside or hold extra tools while moving.
Why the name?
The Owl-Reach is shaped like an owl, and the name is a play on the phrase: "I will reach." Because now you can.
Project Overview
Managing handheld tools is difficult when using crutches. Traditionally, you must either balance awkwardly or occupy your hands with extra equipment. Owl-Reach provides a dedicated mounting point on the crutch itself. Clip your grabber into the Owl Clip and bring it with you. Your hands remain free for travel, and the tool is accessible exactly when you need it.
Design and Compatibility
The system uses a flexible yet rigid approach. The Owl Clip is printed in TPU 95A to flex and securely hold various grabber diameters. The Branch Base interfaces with the crutch and is designed to fit both rectangular wooden crutches and cylindrical metal crutches of various sizes. For smaller diameter crutches, the wing-shaped geometry allows for the use of an elastic band underneath to tighten the fit if needed.
I have included STEP files so you can modify the dimensions to fit your specific equipment.
⚠ LEGAL AND SAFETY NOTICE
NOT A MEDICAL DEVICE: Owl-Reach is an experimental ergonomic prototype. It has NOT been evaluated, approved, or endorsed by any medical or regulatory body (such as Health Canada or the FDA). It is not intended to treat, cure, or manage any medical condition or physical limitation.
SAFETY CAUTION: Always ensure the accessory and the grabber tool are securely attached before moving. An unsecured tool could interfere with your gait or cause a trip hazard. Consult with a healthcare professional to ensure this accessory is appropriate for your specific mobility needs.
USER IS THE MANUFACTURER: By downloading this file, you acknowledge that you are the manufacturer of the physical object. You assume 100% responsibility for material selection, print settings, and safety testing.
TERMS OF USE: Downloading this file constitutes your agreement to the full Tryspire Terms of Use and Disclaimer: https://www.tryspire3d.com/disclaimer-and-terms-of-use
Print Settings
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 30% (Gyroid)
Wall Count: 5
Filament Material: TPU 95A
Note: For the most accurate results, print external perimeters first.
Support and Updates
This design is a work in progress. If you would like to support future Tryspire projects, consider visiting:
Ko-fi: https://ko-fi.com/tryspire3d
Instagram: https://www.instagram.com/Tryspire3d/