Sliger 2U Case Adapter for Ubiquiti Toolless Mini Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount Sliger 2U cases in the Ubiquiti Toolless Mini Rack like native gear
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These adapters lock Sliger 2U cases directly into the Ubiquiti Toolless Mini Rack using the same side locking screws as most Ubiquiti equipment.
Be sure to copy the model in the slicer and mirror one of the copies along the X-axis so that you have one adapter for each side.
I recommend printing with 4 walls to ensure the threaded inserts properly seat. Other settings can be left on defaults as this model won't take much stress once secured. The pictures show the model printed in PETG-CF, but any material should work fine.
Each adapter requires:
1 M4 short (5mm max length) threaded insert - I used https://www.amazon.com/uxcell-Knurled-Printing-Threaded-Embedment/dp/B0CTCSJ7Y8
2 M4x7 countersunk screws (included with your Sliger case and would normally be used to secure the standard rackmount ears to the side of the case)
I tested this on the Sliger CX2130a case, though I believe these should work on any current Sliger 2U case. Please leave a comment if you have any issues with a different Sliger case model!