Easter Bunny Chocolate Egg Holder & Decoration
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hop hop! This cute little easter bunny carries your chocolate egg! No supports. Print time only 1 hour 10 minutes.
- Ocena
- 4,8 / 5
- Polubienia
- 107
- Pobrania
- 473
- Wydruki
- 6
- Wyświetlenia
- 1164
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Spring & Easter
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hop hop! This adorable little bunny carries a chocolate egg on its back. It fits a chocolate egg of 6cm × 4.3cm. You can resize if needed with the .3mf file.
I also included a .stl file without the hole, so you can use it as a nice easter decoration. The bunny's height is approx. 7.65cm.
I printed the easter bunny chocolate egg holder with 0.20mm layer height (0.4mm nozzle), 7% infill (gyroid), 2 perimeters, and fuzzy skin (thickness 0.12mm, point distance 1mm). No supports needed. You can adjust the settings to your liking. With speed profile, print time takes approx. 1 hour and 10 minutes on a MK4S. I used Polymaker Panchroma Matte Pastel Mint PLA for this model.