Dividers for mini Home Depot Tough Totes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a way to segregate items in the storage totes that I found at Home Depot.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 279
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed a way to segregate items in the storage totes that I found at Home Depot, after looking I could not find anything that meet my needs for storing inventory.
I designed these to fit all the way to the bottom of the tote. I don't want the thin items to be able to shift between the dividers.
I have three versions one with large hex openings to minimize the amount to material used, I smaller hex version to prevent some of the smaller items from being able to migrate between the hole and a solid version to fight the problems the other two did not fix. I used 0.28mm layer heights on all with the only thing modified being I added brim ears to minimize potential for warping as I use a cool plate. I also just used PLA as I don't have any need for other material since these are being used in a climate controlled area.
Printing Information
Based on 0.28mm Layer Height
No Supports needed
Standard setting except for brim ears
Large Hex ~31g filament ~49 min
Small Hex ~49g filament ~1hr 20min
Solid (No Hex) ~72g filament ~1hr 18min
Totes Used