rPI case for NVMe base rfox.eu v1.5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Double-sized case for Raspberry Pi 5 with NVMe board.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this case to learn FreeCAD modeling with external geometry, and because I migrated my old microserver to rPI 5 / 16G with NVMe board and active cooler.
The reset button is not accessible in this model. This isn't oversight, I just don't use it and do full power cycle when I need it.
This case requires (from left to right):
Eight M2.5 x 6 screws for rPI
Four hex standoffs M2.5 x 15 x 6
Four hex standoffs M2.5 x 10 x 6
Four hex standoffs M2.5 x 12
You can buy all of this on amazon / aliexpress / ..
So far, this is version 1.x, which works well, but doesn't prevent dust falling into vents. I have plans for 2.x version, which should have "shields" around vents, to prevent dust getting in.