Mount for Dell 4310WX projector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for Dell 4310WX enabling downward tilt for ceiling installation
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a custom 3D printed mount designed for the Dell 4310WX projector, solving a common issue with ceiling installations.
In its default configuration, the projector is not designed to tilt in the opposite direction. When mounted on the ceiling, it naturally points upwards (towards the ceiling) instead of projecting onto a wall. This mount allows you to securely attach the projector and tilt it downwards, ensuring proper image projection.
Key features:
designed primarily for Dell 4310WX
enables inverted tilt for ceiling mounting
stable construction distributing projector weight
compatible with common mounting setups (depending on configuration)
modular design for easier printing and assembly
Use cases:
home theater
office / meeting rooms
DIY projector setups
Printing notes:
recommended materials: PETG or ABS
PLA possible but less suitable for long-term load
recommended infill: ≥30%
print orientation should follow load directions for strength
Use at your own risk – this is a DIY solution.