1 / 3
Fanatec CSL Pedal Bass Shaker Mount — zdjęcie 1
1 / 3

Fanatec CSL Pedal Bass Shaker Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Works with Fanatec CSL Pedals (should work for regular brake, LC brake, and accelerator) and the following 4Ohm 25W…

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
59
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Share Alike

Works with Fanatec CSL Pedals (should work for regular brake, LC brake, and accelerator) and the following 4Ohm 25W Vibration Speaker.

Each mount requires (2) M4x0.7x20mm screws and (1) M5x0.8x25mm hex bolt (with an 8mm head width and 4mm depth - should be pretty standard). I picked mine up at my local Ace Hardware for under $2.50/mount hardware.

If mounting to the brake pedal, you cannot use the bottom-most mounting position as it will interfere with the brake pedal hardware.

Similar mount install video More info about using these bass shakers on your sim rig

Print Settings

Printer Brand:

Creality

Printer:

Ender-3 V2 Neo

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

10%


Notes:

I accidentally designed it upside-down, so make sure to flip it 180* in your slicer before printing.

Category: Toy & Game Accessories

Tagi