Holder for LED light with magnifying glass LIVARNO - Lidl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original holder is very fragile - it can easily crack. So I created printable replacement.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 427
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Original part
Original part can be easily cracked:


I tried to create exact copy of original holder. I didn't have new threaded insert so I removed the one from original part. First I tried to use brute force together with splitting pliers but it was not a good idea. I broke threaded insert into two pieces. Second part I removed by using Dremel + proper tool.

Printing settings
I used this this position for printing + forced supports. By using this position it is possible to print it without internal supports for holes inside of part - in exchange of worse surface of part where supports are used. If you want to have better surface of this part, you can try different printing position.


Printout



Installation of threaded insert
Broken threaded insert is really much harder to “install” then perfect one so don't make the same mistake as I did - do not use broken threaded insert.
Installation of the first part of broken threaded insert was ok, but second part couldn't hold inside properly and when I wanted to remove my soldering iron - it was removed together - so I ruined it little bit.

Attaching metal holder
Metal holder can be mounted by original screw - although I could make hole for it little bit bigger.

