1 / 4
IBM LTO tape drive FH (FC) enclosure — zdjęcie 1
1 / 4

IBM LTO tape drive FH (FC) enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An enclosure made to repurpose an LTO tape drive from a tape library into a desktop peripheral.

Ocena
0 / 5
Polubienia
8
Pobrania
26
Wydruki
0
Wyświetlenia
215
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
GNU General Public License v3.0

The enclosure is designed to accommodate an IBM Model 35P1976 or 35P1972 LTO-6 tape drive "full height". It will also be compatible with LTO-5 drives of the same form factor, and probably older and newer generations.

These LTO drives are powered via a old style 4-pin ATX Molex connector providing 5V and 12V outputs. The enclosure includes some space at the rear to hot glue a small 12V-to-5V voltage regulator (minimum 3A). There is also an 12 mm diameter holes for a barrel power connector and a power switch. On startup the drive pull up to 3A on the 12V power supply, and 2-2.5A during operation. A 60W power supply should be fine.

The fiber optic SFP connector at the rear of the drive is accessible through a recessed section in the enclosure. The drive uses an 8 Gb Fibre Channel interface (for example, with a Marvell QLE-2562 or QLE-2564 PCIe card) and requires an LC-LC multimode fiber cable (OM2, OM3, or OM4).

An SFP-to-USB 3.0 network adapter may also work.

A 60 mm 12V Noctua fan has been added at the rear for cooling, which is absolutely necessary! IBM recommends front-to-back airflow with these drives altought this configuration can increase dust accumulation inside the drive.  The drive should be used in a clean, dust-free environment.

The enclosure also uses these screws : 8x M4_20mm, 2x M2_20mm, 4x M4_12mm. Also 4x M3_15mm screws secure the tape drive in the enclosure.

On Windows these drives (LTO-5 generation and later ) can easily be used for personal backup with the IBM LTFS driver :  https://www.ibm.com/docs/en/storage-archive-sde/2.4.7?topic=installing-downloading-storage-archive-single-drive-edition