FlashForge Adventurer 5M Cheap Buildplate Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Been buying cheap 2 hole build plates off aliexpress... this will work on them.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought some cheap chinesium build plates off aliexpress. the ones with the pretty patterns... yeah they dont have the same hole pattern as the original build plate.
So I designed a handle to fit em. It takes two M3x6mm bolts and nuts to match.
Print them based on the width of the holes in your buildplate... because, go figure, they dont have the holes in the same spot.
Out of the four build plates I ordered, I got three different hole spacings... so... yeah.
Pick between 114mm, 100mm, & 90mm hole spacings.
NOTE:
You may need to pull the bed forward 1mm or so to keep it flat. it shouldnt cause issues with any prints as long as the bed is flat.