Fikiri puzzle #001
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fikiri is an easy to assemble, easy to solve, fully 3d printed, puzzle box.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fikiri #001
Fikiri #001 is my first small puzzle box. It consists of only 5 parts and is easy to assemble, requiring no external fasteners.
Printing
All parts where printed with PLA .2mm layer height speed setting 15% infill.
Ironing on all top surfaces was enabled although it is not required
A thin fuzzy skin on the outside of the main body is recommended (.1 thickness .3 point distance)
No supports are needed.
Assembly
Place the pins flange in the track on the drawer.
Slide the retainer onto the drawer. (It should friction fit if not you could use glue.)
This seemed self explanatory to me so I did not include pictures but I can if you want. Just comment.
Notes (Important)
Make sure the drawer falls out with gravity before assembling the pins.
Make sure the pins slide when the drawer is turned on its side. If not the puzzle will not work. Lubricant can be added if necessary.
Make sure when putting the puzzle together to align the pins with the slots.
If you have any questions don't hesitate to comment.
Thank You! Enjoy!