1 / 2
Twinny Load Easy - Extender for racing/gravel bikes — zdjęcie 1
1 / 2

Twinny Load Easy - Extender for racing/gravel bikes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Corrects for the angle of the top bar so your wheel doesnt hit the ground. Extender (plus rubber)

Ocena
0 / 5
Polubienia
2
Pobrania
2
Wydruki
0
Wyświetlenia
85
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Twinny Load Easy is a nice quickloading bikerack for cars. However with racing/gravel bikes the slope in the top bar makes your front wheel hang too low and it hits the ground (speedbumps). This extender corrects that.

It slides in the existing slots; but ofc not too easy, gently tap it in.

Print without support, ASA/ABS preferably but PetG should work. You will need to find another strap!

Just the rubber?

Tagi