Compact latching box for Sparrows Disc Pick
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A a compact box for the Sparrows Disc Pick that fits in a smaller kit.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
READ FIRST: You will need something to make the 2mm-thick pins for the hinges and latch out of. An old bicycle spoke is perfect.
This is a compact box for the Sparrows Disc Pick that fits the disassembled tool, a couple of spare parts and my spacer. The spare grub screws thread right into the plastic so they can't be lost.
Print settings I used:
Material: PLA
Layer height: 0.2mm
Walls: 3
Infill: 15%
The lid comes in two variants: with and without the Sparrows logo. To print the variant with the logo you must use a layer height of 0.2mm, as that's the precise depth of the logo inset. The instructions below are for Bambu Studio, but your slicer most likely has similar options:
Import the Lid_with_Logo.3mf file.
If prompted, select "Import geometry only".
In the "Objects" tab, choose the filament color to use for each part.
Optional: If you want to rearrange the objects without their relative position changing, select both of them, right click and select "Merge". This will create an assembly that moves together but the objects can still be configured separately.
Click the gear icon next to the build plate to customize the plate options.
For the "First layer filament sequence" setting, select "Customize".
Drag the colors to make sure the color of the logo is earlier in the sequence than the color of the lid.
Slice and print.
PS: Needless to say, Sparrows owns the rights to their logo.