1 / 9
AceXR VR - FCU and Handset inspired by Glock 17 Gen 5 — zdjęcie 1
1 / 9

AceXR VR - FCU and Handset inspired by Glock 17 Gen 5

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

FCU and G17 Gen 5 AceXR: 1:1 scale, 17k rounds tested. Reliable FCU & standard hardware. Remix of Camille COSSA's design

Ocena
5 / 5
Polubienia
65
Pobrania
878
Wydruki
5
Wyświetlenia
3922
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Elevate your AceXR experience with this professionally engineered Glock 17 Generation 5 shell, featuring a fully overhauled and stress-tested Fire Control Unit (FCU).

While the original concept was a great starting point, this version has been rebuilt from the ground up for competitive shooters who demand precision, durability, and a realistic feel.

Key Improvements:

  • True-to-Life Dimensions: Unlike low-quality placeholder models, this Glock 17 Gen 5 frame is modeled with exact 1:1 scale dimensions for a perfect grip and holster compatibility.

  • Hardened Reliability: This setup has been torture-tested on AceXR with over 17,000 rounds fired without a single mechanical failure.

  • Refined FCU Engineering: The internal tolerances of the Fire Control Unit have been meticulously adjusted. No more "mushy" triggers or sticking parts.

  • Standardized Hardware: Forget hunting for obscure parts. This build uses standard pins and springs for easy assembly and maintenance.


Required Hardware (BOM):

To assemble this unit, you will need the following standard components:

  • Steel Pins:  3x Pins (3mmX20mm) and 2x Pins (3mmX25mm)

  • Compression Springs:  2x Springs (0.4mmx5mmx15mm)

  • Elastic:  1x Heavy-duty rubber band (1.4mmx16mm)


Print Settings & Assembly:

  • Wall Count: 4 minimum (for structural integrity).

  • Infill: 40% (Gyroid recommended).

  • Material: PLA+ or PETG for the best impact resistance during high-cadence training.


Credits & Licensing:

This project is a Remix.

The mechanical logic of the FCU is based on the original concept by Camille COSSA. I have modified the tolerances, standardized the hardware, and integrated it into my custom-built Gen 5 frame to create a production-ready training tool.

Tagi