IGPSPORT bike computer holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
bike computer mount and bike handlebar mount
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Hello,
I present my IGPSPORT bike computer mount.
I've prepared a mount for the computer and a mount for the handlebar.
The components require welding in four 3mm threaded inserts. Two to connect the computer mount to the mount, and two more to connect the mount to the clasp. You'll also need four Ø3 countersunk screws.
I printed the print with a 0.15mm layer, 50% infill, and the supports were positioned as shown in the files. It's best to use PETG or another equally durable material for printing.
The most difficult part was the mount for the computer, as the tolerance is tight, and I had to make several test prints to ensure everything engages and disengages with the proper resistance. The handlebar mount itself is a simple component that you can make yourself with minimal 3D skills. The hole spacing for mounting the computer mount to the mount is 24mm.
I hope this holder will be useful to someone, given that spring has arrived. Thank you and best regards to everyone.