Mk3 R4 (Mk3s) Fan Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The stock shroud tends to warp and melt easily, does not provide good coverage for the sides or back, and is only…
- Ocena
- 4,154 / 5
- Polubienia
- 125
- Pobrania
- 2097
- Wydruki
- 11
- Wyświetlenia
- 12 630
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The stock shroud tends to warp and melt easily, does not provide good coverage for the sides or back, and is only mounted with one screw.
I wanted to improve on all of those deficiencies. While I'm quite pleased with the result, my solution involves clipping the shroud onto the PINDA mount. This may result in "tugging" on the mound, requiring you to adjust your Z height values slightly.
Note that this was designed on (and so is compatible with) a Mk2.5s.
Print instructions
ABS, 0.2mm layer height, 0.45mm layer width, no supports.
There is a built-in support for the PINDA clip that will have to be removed prior to installation.