1 / 5
Zajdrax, Pan Lebek: Zajdarx, Mr. Skull — zdjęcie 1
1 / 5

Zajdrax, Pan Lebek: Zajdarx, Mr. Skull

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Zajdrax býval obyčejný tvor lesa, dokud v ruinách nenašel prokletý meč. Ten mu dal sílu padlých válečníků a vzal mu klid

Ocena
0 / 5
Polubienia
8
Pobrania
33
Wydruki
0
Wyświetlenia
80
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Doporučená rychlost tisku 50 % – Tato pomalejší rychlost pomáhá zajistit čisté detaily a optimální kvalitu díky četným podpěrám stromů nebo mužete 100% ale záleži na tiskarně.

Orientace tisk muže na stojaka.

Výška vrstvy doporučuji 0.08 mm pro lepši detail ale taky mužete 0.16 mm.

Materiál: Funguje dobře se standardním PLA nebo matným PLA.

Vyplň 5% nebo 10%

Recommended print speed 50% – This slower speed helps ensure clean details and optimal quality due to the numerous tree supports or you can 100% but it depends on the printer. The orientation of the print can be on the stand. I recommend a layer height of 0.08 mm for better detail but you can also 0.16 mm. Material: Works well with standard PLA or matte PLA.Fill 5% or 10%

Tagi