Alko Bigfoot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alko Bigfoot desigt for Trailer
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Alko Bigfoot imitation for my Knaus trailer. My Trailer is quiet old, the your foot rest might be formed different. I had the problem, that the newer original Bigfoot from Alko did not fit because my foot rest has a little bump on the bottom. So I copied the original one and extended the holding part where the pin goes through.
I Printet mine in PETG, 3 Walls and the part that actually touches the ground is filled 100%. The bracket is printed with 25% infill because it doesn't really hold any weight.
For testfitting I printed a PLA Version with only 7% infill. You might want to try this too, so you don't waste a lot of material in case it doesn't fit your foot rest.