1 / 6
Modular Steel Rack - Wall anchor and spacer (25mm poles) — zdjęcie 1
1 / 6

Modular Steel Rack - Wall anchor and spacer (25mm poles)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two different wall anchors for modular racks based on poles and shelves. This is for Archimedes series 25mmrRack poles.

Ocena
0 / 5
Polubienia
3
Pobrania
2
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

Wall anchor for steel pole modular rack.
This is for 25mm pole diameter.

Two distances wall mount:

  • long size at 115 mm from pole axis to the wall (102.5mm from pole surface)

  • short size at 20mm from pole axis to the wall, (7.5mm from pole surface)

     

Components needed:
  • M3x12 screws

  • M3 square dice (5.5mm size)

Print instructions:
  • Print long anchor with support on base plate only, and add a support blocker on M3 dice slots.

  • All other parts can be printed without support.

  • Use 30-70% infill depending on how much sturdyness you need.

  • I used PLA for easier printing.

Tagi