Slim wallet insert for Yubikey and two door keys
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Super slim ISO/IEC 7810 ID-1 "payment card" sized insert for a Yubikey and two "dumb" keys.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I've been on a quest to reduce the volume and quantity of things I carry around everywhere. I've been using a knock-off slimline wallet for several years and have pruned down the key-chain to just two (backup) door-keys but I still want more of less!
I found several similar models but they're either too large (thick) for my liking or lack just the right storage options so I designed my own.
This wallet insert is as thin as possible, 0.6mm per side plus 3.2mm for the Yubikey. I also designed it to be a single model--just print two copies and snap them together.
Recipe:
0.2mm layer height, "fine" profile
PLA or PETG both work fine.