51 mm Coffee Dosing Cup Adapter for the Femobook A2 grinder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drop-in adapter to replace the plastic receiver of the Femobook A2 grinder and use a 51 mm stainless dosing cup
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
This is intended to be a drop-in adapter that replaces the stock plastic receiver of the Femobook A2 grinder, letting you use a standard 51 mm stainless steel dosing cup. I did this because I found that eliminating the plastic greatly reduces static buildup, which was my main issue with this grinder.
Parts to print:
- Cup holder
- Spacer
No supports needed. Can be printed in PLA.
Bill of materials
- 1× 51 mm stainless steel dosing cup (the model was built for this cup: https://www.amazon.fr/dp/B0GJDDHHR7)
- 4× round magnets, 5 mm diameter × ~3 mm height (optional) — fit into the four holes in the cup holder with a small drop of glue; attach the adapter to the grinder. (I used these ones: https://www.amazon.fr/dp/B097MJLY51)
Note: magnetic hold is weaker than the original receiver.
