Shimano Steps EP8 battery connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My setup: Ebike: Propain Ekano 2 AL Battery: Darfon Charger: Darfon Motor: Shimano EP601
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
I use those for reverse engineering the can bus protocol between the battery and the rest of the system (motor, screen, charger, ...)
You can check the progress here:
https://github.com/CapnDeCode/shimano-steps-ep8-canbus-messages-analysis-data
https://github.com/CapnDeCode/multican-sniffer-bridge
I bought a box of connector pins and found some matching the connection on each side.
Also created some out of laying around copper (cut from a pipe and shaped to fit). Also bought a long time ago some socket terminals for a different project can't remember where.
You can find all on amazon, ebay, aliexpress, and co.
All contacts are just glued in place.