Starlink Mini Thumbscrew Adapter for Pole Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A thumbscrew adapter for the M6 socket head screw on the Starlink Mini Pole Adapter Mount.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
The original outer diameter of the Thumb/Knob/Cap for 5/16" Socket Head Screw model by @BGeorgeFr was to wide to fit the Starlink pole mount, so I shrunk it to a diameter of 15 mm. Otherwise, the dimensions are the same. (M6 is close enough to 5/16" that no adjustment was necessary to the holes for the head and threaded portion of the screw.)
You'll need to thread the screw into the knob because the hole for the threaded portion is intentionally a little small. This provides capture of the screw in the knob. I was able to hold the knob with a pair of pliers while turning the screw with a hex wrench until the screw bottomed out in the knob.
In the third photo, the (black) knob is in use, securing a (orange) tripod adapter in the pole mount.
Printed on a Prusa Mk4 with Prusa Galaxy Black PETG, 0.2 mm QUALITY layer height, 15% infill.