Canon R50 Drive Mode Button Shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very small shield to limit accidental activation of the Drive Mode button by the palm when shooting.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The canon R50 is very small and great travel camera. Unfortunately my palm keeps triggering the Drive Mode button and I've missed many shots. This is simply a small raised shield to give some protection and still allow easy access to change mode.
I've simply used HD double sided tape. Took a few trials to find tape that would stick adequately. I may eventually glue it on as Camera really needs it to be useful.
Due to the complex curves needed it needs support. I found printing it vertically was easiest then supports just strip off. Bit of waste in supports but model is so small.
Canon, if you see this please incorporate something similar in your next update.
June26: Bit of feedback. It's been a great success only issue being I couldn't find double sided tape that was entirely reliable in Aussie heat. So I added a dab of Gorilla glue that stops it moving and hopefully small enough that it wont be an issue if I ever want to take it off. Unlikely as it drove me mad whenever the tape allowed it to slip slightly out of position.
PS: This is a great Travel Camera with just the 18-45 kit lens. You don't need greater reach very often and I left the other lens at home.