UNFINISHED vice with quick swap clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
vice with jaws that can be swapped with just a few bolts. I burnt out on this and didn't finish
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 1
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
I didnt end up finishing this but im uploading it anyways, feel free to keep workign at it, Id love to see what you can make of it! intended assembly is to put the 2 bent t brackets onto one side of the vice, bolt it down and use a ballscrew to pull the sides together. ballscrew is currently just a cylinder tho. then you would use 10-32 bolts x3 or x5 to put the vice jaw in the square hole on in the vice
all parts do fit together, however the ballscrew setup currently has no threads. otherwise the model functions kind of as intended, just not very well. Feel free to try and improve it, Id love to see what you can do.