1 / 4
Hubcap Wheel extension of the Toyota 22RE Engine — zdjęcie 1
1 / 4

Hubcap Wheel extension of the Toyota 22RE Engine

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are Hubcap Wheel for the 22RE Toyota Engine (https://www.thingiverse.com/thing:644933).

Ocena
0 / 5
Polubienia
14
Pobrania
77
Wydruki
0
Wyświetlenia
718
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial

These are Hubcap Wheel for the 22RE Toyota Engine (https://www.thingiverse.com/thing:644933).
his is an add-on for "Rear axle housing for open differential toyota third member" (http://www.thingiverse.com/thing:1344938).
It maintains the drum backing plate in position.

Print instructions

Printer: Geeetech A10

Rafts: No

Supports: No

Resolution: 0.15mm

Filament: Geeetech PLA Black and Silk Silver

Print Settings

1 x HubcapWheel1: Layer:0.15mm Raft:no Support:no Infill:15%
1 x HubcapWheel2: Layer:0.15mm Raft:no Support:no Infill:100%
1 x HubcapWheel3: Layer:0.15mm Raft:no Support:no Infill:100%

Accessories

N/A

Mounting

/!\ The Hubcap Wheel is insert on 3mm rods which must exceed 10mm from the axle flanges (look at the picture Img_2958.jpg). The 3mm rods must not exceed the drum backing plate (look at the picture Img_2959.jpg).

Before mounting, you can make a Post-Printing on HubcapWheel2 ; for exemple, i painted the background in white and the top letters in red.

Glue HubcapWheel1 on HubcapWheel2 ; insert a 3mm screw to center the two pieces.
Glue HubcapWheel3 on HubcapWheel2.
Insert the Hubcap Wheel on 3mm rod to maintain the drum backing plate in position.

More add-ons
https://cults3d.com/fr/collections-de-designs/dancan13f/toyota-22re-engine 

Tagi