Climbing gear organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organizer rack for keeping carabiners, quickdraws, cams, slings and all the other junk you bring to the cliff.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Open Community License v1.1 + GAtt v1 + RnD v1
Gear organizers for carabiners, quickdraws, cams, slings and all the other junk rockclimbing contains.
My goals were for them to be:
Packable
Easy to get an overview of your gear
Be able to hang of the cliff for racking, and racking the entire thing if needed
There is holes in the ends to attach string to clip a carabiner to, I use paracord, but my 6mm Edelrid PES Cord also worked, if you want that emergency Prusik or last piece of string to get your rope down :D
I broke one of the first versions when I was testing flexibility, but otherwise I had no failures, I generally have the big 20 slots loaded with 1-2 kg. Mine weigh about 30g, with string, the horizontal ones weigh 12g, depending on your print setting you can get a different weight of course.
Recommend printing in PETG, that flexes a bit, especially if you'll as me shove them in a bag going to the crag. It was a while since I printed these, but I think its like 3 walls and 25% gyroid infill.
Climb safe and check you knot! :)