Remote status readout adapter for Truma DuoControl / GOK Caramatic DriveTwo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Microswitch adapter for Truma/GOK gas readout. Use with low-current low-voltage sensors to integrate into smart camper.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
The "old" Truma DuoControl (which is the same as the current GOK Caramatic DriveTwo) supports remote readout of the status of the automatic gas bottle switch via a simple microswitch. However, a mechanical adapter is needed to mount the microswitch to the device. This is that, in order to attach your own sensor readout module, e.g., for home automation / smart camper applications.
Please note that within the space where the gas bottles are mounted, any source for ignition must be avoided. Don't just put the switch on 12V and call it a day. Personally, I use an aqara zigbee water sensor for the readout - it encloses the battery in a watertight (and reasonably gastight) enclosure, uses a low voltage (~1.3 V) and an extremely low current (measured 0.0000001 A) for the readout, to ensure no sparks can occur.
It is your own responsibility to ensure the safety when using this adapter.
Uses one M5 x 10mm screw to attach to the gas switch. Remove the hexagonal placeholder before mounting as shown here.
Print as shown in the second picture. Printed using a Prusa Core One with the default 0.1 fast detail settings.
The microswitch this was designed for is a Marquardt 1050; if you want to use a different one, the detailed dimensions are shown in the pictures provided.
The mount for the aqara water sensor shown in the pictures is this one.