K1 Series Gantry Conversion - DB8 (1/3)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Files for Gantry conversion of Creality K1 Series printers.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
These are only Gantry parts for K1 series conversion to Dragonburner, additional modifications to heatbed and tophat may and most likely will be required. (Tested on Creality K1C model)
In case you are only interested in X-Rail only conversion you can find my remix here.
You can follow same BOM and assembly instructions from HDM-K1 conversion, only additional items are:
M6x6mm Set Screw - which was used in Booty's conversion.
M3x20mm FHCS - For toolhead mount
Twin 4010 24v blower part cooling fans
(Original hotend cooling fan can be used, you will need to cut excess plastic and extend cable).
I have tested and implemented DB8 toolhead as you can see in thumbnail, for other compatible toolheads you will need to figure out setup by yourself.
This project is intended to combine these alongside it:
K1 Toolhead Board Mount
Creality K1 Body Raiser
Buildplate Relocation
K1 Hotend Mount for DB8
Liubra Extruder - Mod for DB8
Github project with detailed instructions is intended to be made at one point, but I just wanted to finally share files due to delays.