1 / 2
French Cleat for 12V Skil Battery UPDATED
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
French Cleat for 12V Skill Battery. Updated, longer, lower center of gravity => harder to knock off the cleat
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These work great as a combination battery cover storage on a French cleat. Requires supports, organic work well. Used lightning infill to cut down on material. Not a lot of structural demands on this part. PETG or PLA is fine.
UPDATE: While the original works OK, it was too easy to knock off the cleat. The new version is longer with the battery clipping in to the bottom. Much less likely to fall of the cleat when bumped. Still requires supports.