EU motorcycle license plate holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Only works if the mounting holes are 13.5 cm apart! But it holds the license from all angles.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
The print is a bit tricky.
Support areas have to be painted manually
A stop has to be added mid print to unsert a washer.
I designed this print to use the screws my license plate had:
The washer is designed to be enbedded in the print, so a stop has to be added when slicing at layer 23. When the print stops a 20mm diamater washer has to be inserted.
After this the print can continue and it will print above the washer.
It is inportant to use manual supports and paint the areas which need support see atached picture (DONT FORGET TO PAINT UNDER THE EDGE!). After the print is finnished a 10mm locking nut can be inserted. Since the print will hold the nut attaching it to the bike is easy.