Keurig K-Express Platform Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reduce the mess with shorter mugs on Keurig K-Express machines by lifting the platform up from the drip tray.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Keurig K-Express Platform Extension
This is a very simple platform extension for a Keurig K-Express machine. It's intended to bring shorter mugs much closer to where the coffee dispenses to reduce splashing. The original lid for the drip tray loosely rests on top of this print.
I can't guarantee whether or not this will work for other Keurig machines, but the model can easily be modified/remixed if necessary.
Print Instructions
Print at 0.2mm layer height out of any solid material. Ideally, you'll want to use a color that matches your coffee maker. When you print this, print it in the orientation provided without supports. If you choose to print it upside down, you may need supports for the cuts in the top of the model as that's modeled to securely hold the platform your mug will sit on.
Installation
Remove the platform from the drip tray, place this model with the open side down into the drip tray, then place the platform on top. If you need to brew in a taller container, this piece can easily be removed and the platform placed back onto the drip tray.
How It's Designed
Made with FreeCAD 1.1rc3. STEP files are provided for easier modification/remixing.