1 / 8
lego swivel connectors-FLEX JOINT 6M, Ø24,
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a redesign of these parts to be able to print in filament
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution
This is a redesign or restructuring of these two pieces so they can be printed with filament, since the ones in the model I based them on only work if you print them in resin, and printing resin pieces that will be used for some mechanism will break.
The STL files in your slicer will measure about 24.00mm. To make them work properly, add 2.00mm so they work with the Lego pieces.
As incredible as it may seem, they do work, and in fact, once you put them together, they are quite compact. If one of the legs of the receiver tube breaks when you put them together, don't worry, it will still work.
If you try to recreate this design, I should tell you that it has certain geometric contours that are difficult to recreate. In fact, I've tried to recreate it myself, but it's a rather complex piece. The design of the slicer still has a few polygons