Arrma Kraton 8s Wall Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall hanger for 1/5 scale RC cars.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I need hangers for this beast of a RC car that would hold the full weight without breaking. I probably over engineered these for strength but I have peace of mind that they will hold up. These hangers are super strong. I incorporated a recess for a flat washer to use with the mounting screws or bolts to help distribute the force onto the print.
THESE USE A LOT OF FILAMENT!!!! With my settings they used about 700 grams each, so about 1400 grams total. But they are strong. They are also large. 251mm x 253mm. I printed on a 300mm x 300mm build plate. Print them on the side as they are in the file for maximum strength.
The wheel cradle is for 8.5" diameter tires.
I printed with Sunlu Matte black PLA.
3 walls 15% infill with no supports.
If you want the car to hang parallel to the wall I designed some wall spacers for the wheels opposite of the ones on the hangers. They can be found here ---->