Spool Holder Snapmaker U1 with 608 Bearings Super Smooth
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament spool holder for the Snapmaker U1 printer. The design is based on a cylindrical structure with two standard 608
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 693
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Filament spool holder for the Snapmaker U1 printer.
The design is based on a cylindrical structure with two standard 608 / 608Z bearings. It allows the spool to rotate very smoothly and freely, while also supporting all spool sizes, including small 250 g spools.
It easily supports standard 1 kg filament spools as well.
Fits perfectly in place of the original holders.
It is recommended to print in the orientation provided in the file to increase the durability of the clips.
Recommended print settings:
Material: PETG
Minimum 4 outer walls
5 bottom layers
25% infill – gyroid
Supports: enabled, standard (not tree)
Note:
The model does not include embossed numbering for spool identification – these should be added using the “Add Text” feature in the slicer.