1 / 7
Grip + Tripod Plate for Nikon 1 J5 [UPDATED 4 15 26] — zdjęcie 1
1 / 7

Grip + Tripod Plate for Nikon 1 J5 [UPDATED 4 15 26]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Combination grip and compact arca type tripod plate for Nikon 1 j5, with both vertical and horizontal options.

Ocena
0 / 5
Polubienia
3
Pobrania
41
Wydruki
0
Wyświetlenia
180
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Update 4/15/2026

This update makes it clip onto the body's strap lug tighter, to reduce flex.

About the design

Combination arca-type tripod plate and grip for Nikon 1 J5. 

I'm not going to act like it's perfect, but this grip shape has gone through a lot of iterations to get where it is. The concept is that this camera is already pretty comfortable to hold, despite it's small built-in grip - so this design aims to keep your hand mostly in the same position it would be without the grip, while adding structure around it to brace against. For example, the top of the grip is hollow to give your finger more space to rest against the body of the camera by the power toggle.

Known issues / things to be aware of

Vertical arca plate wedge may not be deep enough for all tripod clamps

This design includes a vertical arca type tripod wedge, hidden in the grip... This part is super non-standard, and may not have a deep enough bite for all tripod clamps. It works on mine, but try it out with your gear before trusting it in the field. Think of this as an extra feature that may help in a pinch - but the priority here was grip comfort first, so this part may not work perfectly.

Bottom arca plate interferes with adapter FT-1's tripod foot

Because I wanted to hide the bottom tripod plate by pushing it all the way forward under the lens, it sticks out too far to use with adapter FT-1.
You probably shouldn't mount the camera by a thin plastic tripod plate on the body while heavy lenses and adapters are attached anyway, so I'm including an alternate version with no tripod wedge. I would simply put a generic plate on the FT-1 adapter's foot instead.
Stay tuned - I might design a dedicated plate for that at some point ;3c

No upper right strap connection point

This design pressure fits onto the body's factory upper right strap connector to reduce flex, and after doing that + beveling that upper edge to make it easier to reach your finger over to the shutter button, I wasn't happy with any of the places I tried putting an upper right strap connector.
Personally, I don't really use those anymore, just bottom right for a wrist strap - but if you want upper right, you could probably modify the design to add it. 

Attaching it

I used these screws: https://www.mcmaster.com/91792A533/
They are standard 1/4" 20 thread with a 1/4" shaft, and a 0.144" deep by 0.492" wide head. 

The grip presses tightly onto the body's built-in strap lug. To attach it, I press down into the table with the grip side down (see last image upload)

⚠ Disclaimer! Use at your own risk!

I have been using 3d printed tripod plate + strap connector combos for years with no problems, but ultimately the safety of your gear is up to you, and I take no responsibility for any damages caused if your copy of this design breaks or does not work with your gear.

Tagi