Festool Domino Dry Fit Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A parametric storage tray designed to hold Festool Domino dry fit tenons upright in a grid, ready for use at the bench.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This tray is the companion piece to my Festool Domino Dry Fits models. It is engineered specifically for those dimensions, but should work equally well with other dry fit prints - or any tenon-shaped part you want to store upright.
These have been tested to fit my dry fits, but you should print a 1x1 holder to test your fit before committing to a full-sized print.
Supported sizes: All six DF500-sized dry fit variants are supported out of the box: 4x20, 5x30, 6x40, 8x40, 8x50, and 10x50.
Fully customizable: Virtually all parameters of the tray and Gridfinity base are configurable:
Domino size variant
Grid rows and columns - as many or as few as you need
Hole clearance - dial in the fit for your printer
Wall thickness, floor thickness, hole depth, and top fillet radius
Debossed size label on the front face for easy identification
Gridfinity-compatible base - no external library required
Optional expand-to-fit mode: when combined with the Gridfinity base, the tray fills the full footprint with evenly spaced holes
Print settings
Recommend using "Precise Wall" to ensure dimensional accuracy.
AI: Claude Code was used to assist with creation of the .scad file. Concept, design, and execution was human-powered.