Harry Potter Full Size Wand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
wanted a full size version But couldn't print the 11 inches on my machine. Created it in parts with a connector
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted it to be true to Harrys wand size so I made it 11 inches. that of course would not fit on my machine. after a few failed attempts I finally came up with the connector version. I've been 3d printing for literally a couple days but wanted to share this design just in case anyone else thought it might be useful. it's 2 parts and one dowel connector. so 3 printed in total. let me know what y'all think and anything to help my future builds. thanks ^_^
already seeing where the dowel cut the outside wall. I will adjust and update soon.
update - the connector was faulty and sliced into the wand. I've since figured out the dovetail connector and updated the design. it's also thicker to be truer to Harry's wand dimensions.
update 2 - printed it was still faulty. corrected again this time I don't see there being any issues. will delete other files.