ErgoGrip Bed Scraper – Angled Edge + Knurled Handle (No Bed Damage)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
ErgoGrip Bed Scraper – Designed for clean, safe print removal
This scraper is built with a precise edge angle to slide under prints easily while minimizing damage to your build plate. The knurled handle improves grip, giving better control and torque during removal.
🔧 Features
Optimized edge angle for easy separation
Knurled grip for better control
Compact and strong design
Works with PLA / PETG / ABS
Compatible with PEI, glass, magnetic beds
🧪 Real Use
Tested on high-adhesion prints (PETG worst-case) – removes prints cleanly without excessive force.
⚙ Print Settings
Material: PLA / PETG (recommended PETG for durability)
Layer Height: 0.16 mm
Infill: 40–100% (higher = stronger edge)
Walls: 3–4
Orientation: Flat on bed
Supports: ❌ Not needed
⚠ Tips
Don’t use excessive force on glass beds
Slight flex or wiggle works better than brute force
Sand edge lightly if you want ultra-smooth contact