1 / 2
AD5X - Extruder Connection - 3 piece with M3 threads — zdjęcie 1
1 / 2

AD5X - Extruder Connection - 3 piece with M3 threads

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed Extruder Connection for ease of print & visual fit. Support free

Ocena
5 / 5
Polubienia
5
Pobrania
45
Wydruki
1
Wyświetlenia
117
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

EDIT 11/08/26: Thanks to Namida Verasche, I used the model for the Version 1 top as reference and created the same piece, but for the Version 1 extruder top. If anyone has V1, I would love to get feedback if it fits. Thanks!

I remade the Extruder connector to give it more smooth edges but also so it's easier to print by splitting the legs of the connector out so the main body can be printed easily. I also redid the throat so when you insert the connection to hot end, it is the same width. 
I thickened the legs so it's easier to print, I added M3x0.5 threads to the top connector. I smoothed out the corners and made a small notch for the cable instead of a large cut. The post is offsetted to the left a bit to give room for the cable to curve cleanly. the plate is 1mm thinner which allows the M3x20mm screw grabs the thread. No supports needed.

the legs are screw in. threads are very coarse so it's easier to print but also, don't force the turn. it should slide right in once you get the thread into the groove.

EDIT FOR CLARIFICATION: It has come to my attention that the extruder head has 2 different versions. This piece is specifically for the v2 extruder, not the v1. I do not have a v1 to model from so I am unable to make one for that version. If anyone is able to send me a stl of the v1 extruder, I am more than happy to create an alternate version that should fit that v1 model.

FYI: Make sure you get M3 screws with 0.5mm pitch. the machine screws you find on amazon and other sites are mostly 0.35mm pitch so they won't latch well. I ended up buying the exact screws from a AMains hobby store.

the screws I got is: HPI Racing button head screw M3x30mm (Hex Socket/10pcs) item #: 160774