1 / 1
Stopfen für / Plug for hydraulic Tektro brake bleed cup — zdjęcie 1

Stopfen für / Plug for hydraulic Tektro brake bleed cup

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Verhindert das Auslaufen des Öls beim rausdrehen / Prevents the leakage of the oil when turning out

Ocena
0 / 5
Polubienia
1
Pobrania
28
Wydruki
0
Wyświetlenia
72
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

deutsch:

Ich verwende den hydraulic Tektro brake bleed cup von Alex zur Entlüftung des Bremshebels. Damit kein Öl austritt wenn ich diesen Trichter aus dem Bremshebel raus drehe habe ich diesen Stopfen entworfen. Ich drücke ihn von oben in den Trichter und verschließe so den Auslauf und kann das Öl dann mit minimaler Sauerei wieder in die Vorratsflasche zurück füllen.

english:

I use the hydraulic Tektro brake bleed cup from Alex for venting the brake lever. So that no oil leaves when I turn this hopper out of the brake lever I have designed this plug. I press it from above into the funnel and close the spout and then fill the oil back into the storage bottle with minimal messing.

Tagi