PrusaBox adapter for "MMU2S Buffer (inspired by RMU Buffer)"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PrusaBox adapter for "MMU2S Buffer (inspired by RMU Buffer)"
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 1281
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I also designed a hinged version PrusaBox adapter hinged for "MMU2S Buffer (inspired by RMU Buffer)" so that you can also open the side door with minimal effort. I kept the original box hinge design language so that it does not appear that it does not belong on the box.
Following my MM2S assembly I had to mount some kind of buffer on my PrusaBox. The buffer I decided to use is MMU2S Buffer (inspired by RMU Buffer).
This adapter will mount the buffer on the side of the PrusaBox on the two holes that already exist on the top cover for the inside spool holder mod.
My design was inspired by this, but it is a complete redesign from the ground up. So this is not a remix, and the part linked does not fit my buffer.
Filament
PETG or PLA
BOM
2x M4x10 Screws (Provided in the PrusaBox Kit)
2x M4 nuts (Provided in the PrusaBox Kit)
Print settings
Perimeters : 6
Layer height : 0.20
Infill pattern : Gyroid