Drill-less Fursuit Wall mount hang
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hook to mount your fursuit head to the wall! And with the option to use adhesive pads instead of drilling
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
A hook to mount your fursuit head to the wall! Has enough separation from the wall to ensure (most) fursuit heads won't get crushed with the wall. Can also be used to hold other masks/costumes, or coats (maybe). The hook is rounded on all edges to avoid damaging the inner lining of the fursuit
Important! Print settings:
0.16mm layer height
5 perimeters minimum (to ensure sufficient strength)
I used 5% infill, feel free to change this to your liking
Print from the base upwards, an ender 3 should be able to print the 30º slope without supports
Note: this is designed to use drill-free adhesive hooks to avoid having to drill walls, useful for renters, the pads I used are like these (check the dimensions!):
https://www.amazon.es/Auptiz-Autoadhesivos-Transparentes-adhesivos-impermeable/dp/B0B3J4TMP3/ref=sr_1_40
https://www.amazon.com/Transparent-Reusable-Adhesive-Waterproof-Oilproof/dp/B0919SV15Q/ref=sr_1_26