Guitar Pickup Height Adjuster Gauge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A feeler gauge to help with setting the guitar pickup height between four different general settings.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A feeler gauge to help adjusting guitar pickup height with four different options and markings denoting the height.
It supports heights of 1.6mm (1/16"), 2mm (5/64"), 2.4mm (3/32") and 3.2mm (1/18"), marked on the gauge - the inch markings are only approximate as I don't use the imperial system. The markings are engraved into the gauge to let you use a fineliner to make the numbers stand out.
Added is a .step file for people who would prefer to CNC machine it, but with a properly set up and tuned printer the 3D printed version will work just as well printed orineted as is - AS LONG AS YOU USE IRONING
NECESSARY PRINT SETTINGS:
Layer height: 0.2 mm
Ironing: enabled
Reason for required ironing: despite the model being designed to be accurate on a 0.2mm layer height, the FDM printing process is ever so inaccurate that makes the gauge slightly thicker than intended; while it's not a big issue, I still wanted to point it out.
You may not use this model for commercial purposes without asking me first.