Sony VGP-PRUX1 Port Replicator Holder Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for original holder (transparent plastic insert propping up an UMPC installed into the dock) for…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a replacement for original holder (transparent plastic insert propping up an UMPC installed into the dock) for VGP-PRX1 Port Replicator for Sony Vaio VGN-UX line of UMPCs. It is designed to be a drop-in replacement, no altering of dock base is required.
Extra parts required:
- 2x DIN934 M3 Nut
- 2x DIN7985 M3x6 Screw (or any screw with head diameter under 6 mm)
Provided files include 2 details - left base (smaller part that plugs into port replicator base) and left holder (right ones are the same but mirrored parts - you can easily mirror them both in Cura before printing). In the second photo you can see recommended printing orientation for both. Holder does not require any supports, for base I recommend using stock Cura supports, not the tree ones.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.12 for base, 0.12 or 0.2 for holder
Infill:
25%
Filament: FDPlast PLA Terminator Grey
Category: Computer