Astronomy Case Organizer Accessory & Ocular Boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular system for organising your astronomy accessory and ocular case.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed in PLA+ without support and upright as the inner edges of the eyepiece holders have an angle of 45°. Printed with a 0.4mm nozzle and 0.2mm layer.
Model is tested with MaxVision 68° oculars, Explorer Scientific 68° eyepieces, Vixen NPLs and Sky-Watcher Plössls.
As 1.25" slightly differs per brand, the oculars will have different fits (somewhere between slightly-tight-fit to somewhat-lose-fit). Same applies to the fitting of the end-caps that will fit underneath the eyepiece holders.
Those holders and boxes don't have an interlocking system as I use foam rubber to fix them in place. The double large holders will fit an eyepiece with an outer diameter up to 60mm. The 5x5 holder will hold an eyepiece with an outer diameter up to 50mm.